 |
|
The V5 Perceptron has the fastest point-collection on the
market with a data point collection of 458,000 points per second and a
laser bandwidth of 140mm. This combined with its twin camera technology
means the V5 can see two sides of an object at once.
• Speed
A maximum of 7640 points along the laser line at a rate of 60Hz
provides the user with unparalleled scan data density. This incredible
rate of upto 458,400 points per second gives a minimum point to point
of 12 microns.
• Large field of view
Having a maximum width and depth of field of 140mm and 110mm,
respectively, enables users of the ScanWorks V5 sensor to rapidly
capture large, geometrically complex, areas.
• Projected
rangefinder
Several features are available to guide the user when scanning. Most
notable is the ScanWorks V5 proprietary field of view projection. The
sensor projects an accurate trapezoidal representation of the field of
view showing the extents as well as optimal scanning offset distance.
This enables the user to quickly become familiar with good scanning
practices and minimise redundant overlapping data. This system is
backed up by an audible tone which changes frequency depending on depth
of field and a graphical output.
• Dynamic range
The ScanWorks V5 sensor has just the same ability to capture data on
dark and reflective surfaces as the proven ScanWorks V4i sensor. Its
class leading dynamic range negates the need for harmful white powder
sprays and paints. The addition of advanced software filters enables
dynamic reflection removal and hardware filters make the sensor
impervious to ambient light.
• Accuracy
Field calibration of the sensor is entirely independent of the hard
probe. Within a few minutes, the user can precisely align the sensor to
the PCMM co-ordinate frame without having to calibrate the hard probe
first. Factory rectification of the V5 sensor ensures measurement
accuracy of 24 microns 2 sigma throughout the entire field of view.
• Real-time integrations
Direct integrations with InnovMetric, PolyWorks, Geomagic, Rapidform XO
and Delcam PowerINSPECT allow the user to scan within a familiar
interface. Time consuming file management becomes a thing of the past
because the data is captured real-time within your preferred reverse
engineering or inspection suite.
• Usability
The lightweight ergonomic design of the ScanWorks V5 scanning solution
makes easy work of even the most arduous measurement tasks. With the
PCMM’s hard probe exposed at all times, at the flick of a switch, the
user can alternate between non-contact and contact measurement. This
feature can be extremely useful when setting up alignments or datum
features.
• Portability
The ScanWorks V5 sensor is transported in a wheeled flight case similar
in size to a small suitcase. Along with the PCMM and laptop computer,
the entire scanning solution easily fits into a family car. Magnetic
mounts on the PCMM base ensure a robust setup in a manufacturing
environment. When a magnetic surface is not on hand, a range of tripods
is available at extra cost.
• Versatility
ScanWorks V5 is suitable for numerous industries and
applications, from the factory floor to inspection rooms
and laboratories. Industries where ScanWorks is delivering
value and cost savings include:- Aerospace, animation,
automotive, consumer products, cultural heritage, forging,
investment casting, mould & die, plastics,
prototyping and stamping.
